We install M-switches on almost all of our models which is a must for every clean reconstruction.
Scope of delivery:
mo.switch mini aluminum housing
3 integrated high-quality buttons per unit
M5 stainless steel mounting screws
The mo.switch mini is a universal, small button fitting for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in an attractive look
Very small and narrow, but very distinctive due to the elaborate contrast cut. The housing, which is milled from solid, is first anodized and then milled over at the edges.
3 miniature buttons with a defined pressure point are embedded in recesses that give the thumb the necessary orientation. The pushbuttons are protected against splash water and are very robust.
The individual strands are already soldered ready for use and potted watertight. You only have to drill a hole for the thin cable in the handlebar. With two meters of cable length, there are sufficient reserves for installation.
The two halves of the housing are screwed together with two stainless steel screws and fit on handlebars with a diameter of 22 mm or 1 inch.
The case is also available polished. Of course without the contrast look. If there is not enough space on the right handlebar for a mo.switch mini due to a large throttle grip, two push button housings can also be mounted on the left grip. The six buttons and the symmetrical millings create a special eye-catcher.
The mo.switch mini with the mo.grip aluminum grips or the rubber grips mo.grip soft as well as the handlebar end indicator mo.blaze disc and the rear view mirror mo.rear form a super stylish handlebar image. This modular and high-quality handle, turn signal system adorns the cafe racer just like any other handlebar.
In conjunction with an electronic push button control (not included in the scope of delivery), these beautiful CNC-manufactured fittings can handle all electrical units such as Switch lights, turn signals, electric starter, horn and much more.